Clutch wont disengage on 650G

   / Clutch wont disengage on 650G #1  

dwoofter

New member
Joined
Sep 26, 2009
Messages
11
Today I was pushing snow with my Satoh and it was working perfectly. I had stopped and started numerous times without an issue. Then I pushed in the clutch and it did nothing, and I continued to travel forward. I shut it off and checked the hydraulic slave cylinder. It was still pushing the disengagement lever as it was supposed to. I even disconnected the slave and used a crow bar to force the disengagement lever to its max position but tractor would still not disengage??? I have read where the clutch can rust to the flywheel but I wouldnt imagine that this would happen when its being used and working fine. Does anyone have any ideas of what happened here???? Any help would be appreciated.

Dave
 
   / Clutch wont disengage on 650G
  • Thread Starter
#2  
I pulled the inspection cover on the bottom of the tractor to get a look inside. One of the three fingers that is mounted to the pressure plate broke off. It looks like the bolt sheared off that holds the finger in position. I called the guys at valley power and they were super helpful. They told me how much to expect to pay for the parts and explained how to split the tractor. Looks like a project!!!
 

Tractor & Equipment Auctions

2004 Ford Taurus Passenger Car (A51694)
2004 Ford Taurus...
2008 Volkswagen Eos Convertible (A50324)
2008 Volkswagen...
2019 Chevrolet Tahoe SUV (A50324)
2019 Chevrolet...
2012 GOOSENECK TRAILER MFG.,CO, INC TANDEM AXLE MANIFOLD TRAILER (A52472)
2012 GOOSENECK...
2017 Jaguar F-Pace AWD SUV (A50324)
2017 Jaguar F-Pace...
2012 Ford F-250 4x4 Pickup Truck (A50323)
2012 Ford F-250...
 
Top