rozett
Platinum Member
- Joined
- Mar 23, 2002
- Messages
- 730
- Location
- Maine
- Tractor
- Cub Cadet 7360SS & Craftsman GT3000 23 HP w/50
While doing some mowing with the BH recently, I noticed that my 7360 has been running on the warm side. I was due for service anyway, so I took a good look at the cooling system. Replaced the air filter... it was dirty but not exceptionally so. The front compartment was kinda dusty, so I took out the compressor and tried to blow out the dust. Well, to my surprise, loads of dust came out the back (engine) side of the radiator. So I took a good look and the fins were completely clogged with dust. I could not see through the radiator to the engine. Took me about an hour to clean it out...first with air and then with the hose (water). Made a big difference. /forums/images/graemlins/laugh.gif So did the new air and fuel filters.
So, when servicing your toy...err tool, take the time to check out the radiator fins.
So, when servicing your toy...err tool, take the time to check out the radiator fins.