Cleaning up Brush with the 45

   / Cleaning up Brush with the 45
  • Thread Starter
#11  
Final pic, shows more of the tractor than the brush being lifted. It is nice working inside, not something I've been used to but am getting accustomed to real quick. For a lot of the lifting I didn't even need 4wd, even when digging in the heavy soil. Only complaint on this tractor is the on/off of the FEL, so far everything else has worked well.
 

Attachments

  • 891703-Brush Cleanup.jpg
    891703-Brush Cleanup.jpg
    88 KB · Views: 227
   / Cleaning up Brush with the 45
  • Thread Starter
#12  
Final pic, shows more of the tractor than the brush being lifted. It is nice working inside, not something I've been used to but am getting accustomed to real quick. For a lot of the lifting I didn't even need 4wd, even when digging in the heavy soil. Only complaint on this tractor is the on/off of the FEL, so far everything else has worked well.
 
   / Cleaning up Brush with the 45 #13  
</font><font color="blue" class="small">( Only complaint on this tractor is the on/off of the FEL, so far everything else has worked well. )</font>
What do you mean? Taking it off and on?
John
 
   / Cleaning up Brush with the 45 #14  
</font><font color="blue" class="small">( Only complaint on this tractor is the on/off of the FEL, so far everything else has worked well. )</font>
What do you mean? Taking it off and on?
John
 
   / Cleaning up Brush with the 45
  • Thread Starter
#15  
I want to gather up the dirt also so it is working fine. This will be an area where I am going to be doing some dog training so don't want to fall over piles of dirt. I had attempted to burn those brush piles before with no success. The top of the loader bucket, so far, is handling the stress fine. I put it back as far as I could on the top, bolted it down with 6 bolts, am careful about backing away with a load and not twisting and pulling when the arm is down. The Dehner grapple is a beast, seems suited for that size tractor.
 
   / Cleaning up Brush with the 45
  • Thread Starter
#16  
I want to gather up the dirt also so it is working fine. This will be an area where I am going to be doing some dog training so don't want to fall over piles of dirt. I had attempted to burn those brush piles before with no success. The top of the loader bucket, so far, is handling the stress fine. I put it back as far as I could on the top, bolted it down with 6 bolts, am careful about backing away with a load and not twisting and pulling when the arm is down. The Dehner grapple is a beast, seems suited for that size tractor.
 
   / Cleaning up Brush with the 45 #17  
What about the FEL on/off comment? I'm curious as to what you meant about that. I assumed you meant the taking off and putting on of it.
John
 
   / Cleaning up Brush with the 45 #18  
What about the FEL on/off comment? I'm curious as to what you meant about that. I assumed you meant the taking off and putting on of it.
John
 
   / Cleaning up Brush with the 45
  • Thread Starter
#19  
KJ---I posted something a while back, it's on page 2 entitled, I Will Never Take My Loader Off Again. It's about my trials and tribulations with the 451 loader removal, no big deal compared to the problems that many are having with the cracked loaders but at the time was frustrating.
 
   / Cleaning up Brush with the 45
  • Thread Starter
#20  
KJ---I posted something a while back, it's on page 2 entitled, I Will Never Take My Loader Off Again. It's about my trials and tribulations with the 451 loader removal, no big deal compared to the problems that many are having with the cracked loaders but at the time was frustrating.
 

Tractor & Equipment Auctions

JOHN DEERE 975 3 BOTTOM SWITCH PLOW (A51243)
JOHN DEERE 975 3...
2016 FREIGHTLINER CASCADIA DAY CAB (A51222)
2016 FREIGHTLINER...
BW RVB3405 20,000lbs 5th Wheel Hitch Base (A50322)
BW RVB3405...
2014 UTILITY 53X102 DRY VAN TRAILER (A51222)
2014 UTILITY...
2020 MACK PINNACLE (A50854)
2020 MACK PINNACLE...
IH Farmall 706 Tractor (A50514)
IH Farmall 706...
 
Top