Ck35 Hst Headlights won't work

[bbenyack]

Was in the woods this evening, went to leave and headlights wouldn't work on low beam. I switched to high and they worked. Switched back to low just to check again...nothing. Switched back to hi, they came on then went out. They flickered once when I first went to back out. Dash lights, tail lights and high beam indicator all are working. Checked wiring from headlights back as far as I can see, everything looked ok. There was a crimp mark on the harness where it goes over the firewall behind the engine but wires inside feel ok. I reached up to the headlight switch and moved all the connectors and wires and not even a flicker. Any ideas? head light switch gone? Only have about 250 hrs on machine.

 

[BTI]

More than likely if you pull the connector apart under the right side floorboard you will find one of the blades corroded.

BTI

 

[bbenyack]

Mystery solved, I think. Both headlights lamps were shattered. Was some condensation on the inside of the lens. Kind of weird the way they both went at the same time. Don't know what caused that. Guess I'll find out if I've got other problems when I get new bulbs.