ck30hst tach stopped!

   / ck30hst tach stopped!
  • Thread Starter
#2  
Found tach sensor bottom R of engine, using manual; it had cracked and the part the connector was attached to had separated about 1/8" from the body of the sensor. Don't know how this could happen except vibration.

Note that the actual body of the sensor has cracked, not the connector separating from the sensor.

When I pushed the sensor back together, the tach worked.

FYI

MIke
 

Attachments

  • kioti tach sensor.jpg
    kioti tach sensor.jpg
    16.5 KB · Views: 142
   / ck30hst tach stopped! #3  
Sounds like a job for some two part epoxy and a small clamp :p
 

Tractor & Equipment Auctions

JOHN DEERE 772GP MOTOR GRADER (A58214)
JOHN DEERE 772GP...
HELI 5K FORKLIFT (A58214)
HELI 5K FORKLIFT...
2025 YOUERT YOU12 1-Ton Mini-Excavator with dozer blade (New/Unused) (A59225)
2025 YOUERT YOU12...
Forklift Safety Basket (A56857)
Forklift Safety...
UNUSED FUTURE FT20 EXCAVATOR (A52706)
UNUSED FUTURE FT20...
2018 Cadillac Armbruster 70 IN Limo - Only 49K Miles - Luxury Transport, Clean, Well-Maintained (A56435)
2018 Cadillac...
 
Top