CK30HST Hour Meter?

[VT365]

My Hour Meter just quit. Any suggestions on where to start looking?

 

[BTI]

Does it still show the hrs but not getting any higher?
Or is the display completely out?

BTI

 

[VT365]

Displays the hours, but no progression.

 

[rapracing]

Mine did the same thing right after I got it. There is a wire, I think under the right running board (could be the left and I don't remember the color), that was unpluged. It is a single wire and was very obvious. If I remember I will look tomorrow and let you know. In the mean time take a look and if that is the case you will see it. It is just a single wire with a push together plug.

 

[Trac-Tech]

Has it clocked up some hours and then stopped? If so, there is what they call the FFT controller in behind the dash (as my memory serves me). This will most likely be the problem.
Hope this helps.

 

[darkviper]

My CK 20 did this and i had to replace the whole cluster. about $200.00 its real fun to get to about a 1.5-2 hour job