CK10 rear remote hydraulic couplers, what type are they?

[dieselfuelonly]

Setting up a hydraulic top link, I bought a cylinder, some 3/8 hydraulic hoses and what I thought were the correct fittings from Agri Supply but they're too small. Any idea on if any of the fittings from the following page will work?

Hydraulic Cylinders, Cylinder Repair Kit, Hydraulics Parts

Thanks!

 

[L47TLBwannabe]

Post a photo it makes it easier to tell what you have, pretty sure mine are bigger than 3/8" though.

 

[ritcheyvs]

Mine are 1/2 inch Pioneer-style quick couplers (agricultural style, not flat face)

 

[xcgreene]

Most common quick coupler sizes you'll find around the farm are here

View attachment Quick Connect Size Chart, Hydraulic.pdf

 

[LouNY]

The most common are the nominal 1/2" ag style quick connects,
I prefer the poppet style such as this one on your linked page;
Vp8-4P-Dc Decompression Nipple | Agri Supply 49611
Some times these can be connected under some pressure.

 

[dieselfuelonly]

Thanks guys, for what it's worth I picked up these:

Vp8-4P Poppett Male Tip-Universal Hydraulic Tip, 1/2 Nptf

and some 1/2" to 3/8" adapters and they work great with my 3/8 lines.

 

[ritcheyvs]

Thanks guys, for what it's worth I picked up these:

Vp81-4P Poppett Male Tip-Universal Hydraulic Tip, 1/2 Nptf

and some 1/2" to 3/8" adapters and they work great with my 3/8 lines.

Those should work fine. The style with the stud (as you posted) allow better fluid flow than the round face end style. That might be important for something with high flow rates but not a factor for a top link. The style with a decompression poppet (like Lou posted) is handy for things like a grapple which are removed frequently. The problem there is the hydro lines of the attachment can self-pressurize if the attachment warms up while it's disconnected, making it hard to reconnect.