Changing lift pin for quick hitch

[Alan W.]

Found these cat 2 to 3 lift pins. Decided to try them after not being pleased with the bushings.
Fit my hitch perfect and a lot stronger. I had no 1 1/8 bit so my son used a HF stepped bit to start
hole a bit and finished it with a holesaw. Went quick I was surprised how good it worked.

 

[WranglerX]

FYI... They make what's called a "bridge reamer" very expensive but its a tapered reamer, I have one that goes from 1/2 to 15/16 that was purchases for specific project.... Most are easy to use and you can get large diameter reamer and just stop letting it cut when you get hole large enough....

Bridge Reamers | DrillsandCutters.com

I actually made a sleeve from PVC pipe to limit depth of cut for my project...

Dale

 

[countrybumpkin]

Did the same thing on a couple of rotary cutters, worked great.