century 2028 hydrauics problem

rogerdodger · Jan 11, 2013

wel back again finaly got a new drive gear (splines were completely gone) and hydraullic pump (which shaft was twisted) for this tractor but need pdf file for repairing have most of bolts out of front gear case but have a question about removal of the throttle cable which is in front of case and also the governor which is on side of case. I dont want to mess something else up at this point. does anyone know where i can find pdf file for this repair? thanks

pdittlysquat · Jan 18, 2013

rogerdodger,

I have the chassis/service manual that I could scan the section you require if you're still looking for documentation.

J_J · Jan 18, 2013

Have you determined what caused the shaft to twist?

Were the pump bolts tight when you removed the pump?

Perhaps the pump was deadheaded and the engine continued to run.

You might try and see if all hoses are connected correctly.

Check also to see if there is flow through all the valves by using air to see if air can flow through all the valves to tank.

rogerdodger · Jan 18, 2013

pdittlysquat,

i could sure use any help i can get and that sounds perfect the guys at tractor sales know parts but not how to repair or sequence in which to disassemble and reassembly of the front case i.e throttle cable and governor thanks for your help