Solidoak
New member
im looking for a case 580 mod or 3 pt hitch. or something similar that would also work...
Case Backhoe 580 mod hitch or 3 pt hitch wanted
- Thread starter Solidoak
- Start date
- Views: 11774
DJ54
Elite Member
- Joined
- Jan 20, 2009
- Messages
- 4,585
- Location
- Carroll, Ohio
- Tractor
- IH Farmall 656 gas/ IH 240 Utility/ 2, Super C Farmalls/ 2, Farmall A's/ Farmall BN/McCormick-Deering OS-6/McCormick-Deering O-4/ '36 Farmall F-12/ 480 Case hoe. '65 Ford 2000 3 cyl., 4 spd. w/3 spd Aux. Trans
You might try calling here. Only shows one picture, but. could have the 3 pt. on it. J I CASE 58 CK Dismantled Machines - 1 Listings | TractorHouse.com - Page 1 of 1
I'm not sure what the difference between a 580, and a 570 is, but there are more than several listed here. Scroll down,and there is one showing a complete 3 pt. hookup that looks to be in pretty good condition. J I CASE 57 Dismantled Machines - 8 Listings | TractorHouse.com - Page 1 of 1
I'm not sure what the difference between a 580, and a 570 is, but there are more than several listed here. Scroll down,and there is one showing a complete 3 pt. hookup that looks to be in pretty good condition. J I CASE 57 Dismantled Machines - 8 Listings | TractorHouse.com - Page 1 of 1
BukitCase
Elite Member
- Joined
- Feb 17, 2012
- Messages
- 2,753
- Location
- Albany OR
- Tractor
- Case 580B, Long 460, Allis-Chalmers 160
The Case 570 appears to be just a tractor
TractorData.com J.I. Case 57 tractor information
So it's likely that a 3PH for that tractor would be just the "normal" farm type, no power down, etc -
What model Case 580 you have would determine what you can/cannot do - not sure when the change happened, but somewhere around the C or D model ? the 580 was ONLY a backhoe, only way to take the hoe off was in PIECES -
I have a 580B, the hoe (and other attachments) mount on a 4-point subframe I also have the factory INDUSTRIAL 3 point attachment - no draft control, but DOES have TnT plus one remote, AND it has float AND power down but does NOT have position control. The Down valve is just a normal power up/down or FLOAT.
When I say "power down", I'm not kidding - with the 7' Gannon box on the back, I could easily lift the tractor's rear wheels off the ground...
If you get some experience (AND make a pair of 6' extender hoses) you can swap between hoe and 3PH in about 1/2 hour, but a couple of the mount components take 450 ft lbs of torque - I finally got tired of the swaps and bought a couple used tractors for regular implements. Also, even tho you might find a rear tranny plate with a PTO, it would need to COME OFF before the hoe goes back on (not enough clearance) - another reason I gave up on "one size fits all"...
Here's a pic (not mine) of one that's just like mine -
Again, a bit more info (model, what you wanna do) might help us help you... Steve
TractorData.com J.I. Case 57 tractor information
So it's likely that a 3PH for that tractor would be just the "normal" farm type, no power down, etc -
What model Case 580 you have would determine what you can/cannot do - not sure when the change happened, but somewhere around the C or D model ? the 580 was ONLY a backhoe, only way to take the hoe off was in PIECES -
I have a 580B, the hoe (and other attachments) mount on a 4-point subframe I also have the factory INDUSTRIAL 3 point attachment - no draft control, but DOES have TnT plus one remote, AND it has float AND power down but does NOT have position control. The Down valve is just a normal power up/down or FLOAT.
When I say "power down", I'm not kidding - with the 7' Gannon box on the back, I could easily lift the tractor's rear wheels off the ground...
If you get some experience (AND make a pair of 6' extender hoses) you can swap between hoe and 3PH in about 1/2 hour, but a couple of the mount components take 450 ft lbs of torque - I finally got tired of the swaps and bought a couple used tractors for regular implements. Also, even tho you might find a rear tranny plate with a PTO, it would need to COME OFF before the hoe goes back on (not enough clearance) - another reason I gave up on "one size fits all"...
Here's a pic (not mine) of one that's just like mine -
Again, a bit more info (model, what you wanna do) might help us help you... Steve
