Capacity for loading R4 tires on a 2520

   / Capacity for loading R4 tires on a 2520 #1  

Landon

New member
Joined
Aug 31, 2010
Messages
21
Location
Greene, Iowa
Tractor
Kubota L175 and John Deere 2520
I just loaded the R4 tires with windsheild washer fluid on my 2520 last night and thought that I would post some capacities. I couldn't seem to find this info while searcheing the other day, and the charts that one chart that I looked at was off by a long shot. The rear wheels held 25 gallons each and the front wheels held 5.5 gallons each. I filled them just over the top of the rim. I used the drill pump method with it hooked to my drill press. It took me about 4 hours from start to finish to get it done. Now for the fun part, seeing how much more traction I have.
 
   / Capacity for loading R4 tires on a 2520 #2  
Thanks for the info. What is the tire size on the 2520?

Should get you about 400 lbs on the rear, but I still have a ballast box in addition to the fluid to counter weight on the FEL.

You did add the lower temp WW fluid - - right? :)
 

Tractor & Equipment Auctions

Kioti DK 35, 4WD, Quick Attach Loader with Bucket  (A52384)
Kioti DK 35, 4WD...
2019 Allmand Night-Lite V-Series S/A Towable Light Tower (A52377)
2019 Allmand...
Billy Goat Blower Paint Dryer, 6.5 Briggs (A52384)
Billy Goat Blower...
2022 KMC 5610 LOT NUMBER 196 (A53084)
2022 KMC 5610 LOT...
2022 CATERPILLAR 279D3 SKID STEER (A51246)
2022 CATERPILLAR...
TAYLOR TDF-60S STRAIGHT MAST FORKLIFT (A51246)
TAYLOR TDF-60S...
 
Top