Snappy BX
New member
Hello to all,
I developed a hydraulic leak on my BX22. It leaks while running and seems to be located by the hydraulic control valve (runs down the priority valve)
I have replaced both o rings behind the valve, also the o rings on the pirority control valve. It does not seem to be a pressure leak, the fluid runs down does not spray as it would seem to, if it is pressure leak.
The fluid is at the correct level, the filter has been changed and also the screen checked.
Any thoughts or ides would be greatly appreciated.
I developed a hydraulic leak on my BX22. It leaks while running and seems to be located by the hydraulic control valve (runs down the priority valve)
I have replaced both o rings behind the valve, also the o rings on the pirority control valve. It does not seem to be a pressure leak, the fluid runs down does not spray as it would seem to, if it is pressure leak.
The fluid is at the correct level, the filter has been changed and also the screen checked.
Any thoughts or ides would be greatly appreciated.
