BX 2370-1 Project

Michael Leggett · Oct 26, 2015

First time poster, first time Kubota owner. I have been doing lots of mods and wanted to share my project. I have slideshows and videos on YouTube also.

https://www.youtube.com/channel/UCsF0NLJSvjdzEnX5XGi7C9A/videos

davesl708 · Oct 26, 2015

Hi. Welcome. Pics are welcome too.

kcender · Oct 26, 2015

Welcome to TBN.I will check out your videos.

Michael Leggett · Oct 27, 2015

Michael Leggett · Oct 31, 2015

I found the factory wiring connectors to hook up extra lights.

https://www.youtube.com/watch?v=PoRWEqg8mBw

gogojuice · Nov 1, 2015

Michael,

Thanks for the video. I'm going to post that link to the thread I had about LED lights.
Very useful. Well done.

Michael Leggett · Nov 2, 2015

Glad it was useful gogojuice, thanks.

Michael Leggett · Nov 3, 2015

Michael Leggett · Nov 4, 2015

Michael Leggett · Nov 10, 2015

The ROPS is way to tall so I cut 10" off mine. Now it looks right with the canopy and still provides safety and I'm 6' 6" tall.

https://www.youtube.com/channel/UCsF0NLJSvjdzEnX5XGi7C9A/videos

Michael Leggett · Nov 15, 2015

The idle on my BX was 1800 RPM from the factory but now it is 1100 rpm and smooth, here is the video;

https://www.youtube.com/channel/UCsF0NLJSvjdzEnX5XGi7C9A/videos

Blue power · Nov 17, 2015

1800 rpm is way too high, the settings must have been wrong.

Michael Leggett · Nov 19, 2015

I assumed that also. I did read several posts about the idles being at 1500 RPM and slightly more. It is just the way I like it now.