hope someone can help me out. I have a bx2230 with a la211 fel. I built a 60" snow plow with double acting cylinders(8"x1") for lift and angle. My problem is when i angle the plow to the right it will automatically swing to the left if you dont push past the detent in the valve. when i have the loader on this is not an issue. could it have something to do with the size of thwe cylinders i am using or can i adjust the detent in the spool? Thanks ahead of time for any info you can give.
Bx 2230 hyd fel valve
- Thread starter Scottiboy
- Start date
- Views: 706