Buying a used XG3025

   / Buying a used XG3025 #1  

cicsasus

New member
Joined
Oct 7, 2022
Messages
4
Tractor
MT125
Hi, there is a used XG3025 on a local dealers lot for $13500. Hours are 520hrs and is 2017 model. I had a quick look and it still looks great. According to the dealer they have all the documented maintenance records and recalls have been done. Obviously no warrantee on this, but is it a good buy or not? I will be grateful for any advice. Thanks!
 
Last edited:
   / Buying a used XG3025 #2  
the price dont seem to bad in these times ,
at those hrs that tractor was worked ,, though
only recalls that i know of was the frame , where they shimmed
the right side of the frame .

i bought my 2016 3025 for 12.9 with 62 hrs going on 2 yrs now .
as long as you keep it within reason it should meet your needs .
I use mine to finish mow 5 acres , and drive way grading
in the summer months and in the winter for fire wood and pushin snow .my current hrs
is 148 hrs with no problems to date , ive added two remotes in the rear and a third function for the front as i use a grapple bucket for brush clean up aswell.

3yjhXZd.jpg
 
   / Buying a used XG3025
  • Thread Starter
#3  
the price dont seem to bad in these times ,
at those hrs that tractor was worked ,, though
only recalls that i know of was the frame , where they shimmed
the right side of the frame .

i bought my 2016 3025 for 12.9 with 62 hrs going on 2 yrs now .
as long as you keep it within reason it should meet your needs .
I use mine to finish mow 5 acres , and drive way grading
in the summer months and in the winter for fire wood and pushin snow .my current hrs
is 148 hrs with no problems to date , ive added two remotes in the rear and a third function for the front as i use a grapple bucket for brush clean up aswell.

3yjhXZd.jpg
Nice tractor!
 
   / Buying a used XG3025
  • Thread Starter
#4  
I didn't get the XG but got a new MT225S instead. Everything looks amazing so far.
 
   / Buying a used XG3025 #5  
ok sounds good now give us the details .
what came with it and curret price out the door .
 
   / Buying a used XG3025
  • Thread Starter
#6  
1020221535_HDR.jpg

The got the tractor from a local dealer for less than $17k and the box blade from another dealer for $575. Already has 7 hours on the clock :)
 
Last edited:
 
Top