butterfly bolts strong enough?

   / butterfly bolts strong enough? #11  
Installing blocking between the rafters (actually I think you mean "ceiling joists") is a good solution.

I'm not sure what your pot rack looks like, but if you're going up into the attic, you might be able to lay a 2x6 across the top of the joists and use a piece of all-thread (long rod that's threaded end to end, available at any hardware store (Home Depot, Lowe's, TSC, etc.)) to go up through the drywall, through the blown-in insulation, through your 2x6, and through a washer and nut. That would be easier to install and even stronger than your blocking which relies on the shear strength of screws. However, I do think that your blocking would be strong enough for a pot rack.
 
   / butterfly bolts strong enough? #12  
Good deal.. that wood is the way to go.

Do yourself a favor and poke a pinhole with a nail in the drywall where yuo want the 2 lag eyes to go in.. that way you can locate your wood members correctly.

Soundguy

goaliedad said:
UPDATE: LOML made it clear she did not want a cobble job- read that as no 4 inch holes with cute covers, no cleats spanning the closest rafters. I have cut an opening into the attic from the garage- it's going to be a tight fit, but I only have 13 feet to crawl. The rafters actually have some good, level cross members that I have a plank laid on. Saturday morning, while it is nice and cool I am going to crawl in, clear the blown insulation and screw in some nice 2 x 6 blocking.
Sorry, but there will be no horror stories about a fallen pot rack. Maybe a good one about a fallen homeowner....

I will let you know how it goes.

Thanks for the ideas. I guess I knew all along this is how it would end.
 
   / butterfly bolts strong enough?
  • Thread Starter
#13  
Soundguy- I'm already there- I used a plumb-bob to mark the corners- referenced off the island. I put finish nails in to mark it. I pushed a piece of coat hanger in so I can see where I'm going to be working.

I thought about laying a board across the rafter- but they are engineered and buried under the insulation- gotta dig anyway.
 
   / butterfly bolts strong enough?
  • Thread Starter
#14  
The blocks are in- I'm out of the very tight attic- and most importantly, the ceiling is intact! Now all I have to do is put the lag-hooks in and hang the ^&*^()%$ pot rack!
Momma's happy, so everyone can now be happy!!!!
 
   / butterfly bolts strong enough? #15  
Yep.. any time you can come outta there with no holes in the drywall shaped like feet,.. it's a good day!

Soundguy
 

Tractor & Equipment Auctions

2016 Hitachi XZ300LC-6 (A47477)
2016 Hitachi...
2016 Ford Fusion Sedan (A55758)
2016 Ford Fusion...
2021 FREIGHTLINER M2106 DEBRIS BUCKET TRUCK (A51406)
2021 FREIGHTLINER...
UNUSED 78" HYD ROCK GRAPPLE (A54757)
UNUSED 78" HYD...
Preliminary Listing / Full Catalog Coming Soon! (A53314)
Preliminary...
New Holland TS 75 Front Loader Utility Tractor (A53421)
New Holland TS 75...
 
Top