Rio_Grande
Platinum Member
- Joined
- Dec 11, 2007
- Messages
- 555
Anyone know where I can price a burning bar setup? Been tortching alot of equiptment lately and need to bring costs down.
Burning bar?
- Thread starter Rio_Grande
- Start date
- Views: 1629
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,952
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Are you talking about Exothermic Cutting Systems. I have one of those sets, and purchased some rods but never did set one off. The rods are not cheap.
http://www.oxylance.com/product_catalog/exothermic_cutting_systems/burning_bar_holders
http://www.pccampana.com/caldotorch/burning-bars.htm
I believe most any welding shop would have those rods and holders.
http://www.oxylance.com/product_catalog/exothermic_cutting_systems/burning_bar_holders
http://www.pccampana.com/caldotorch/burning-bars.htm
I believe most any welding shop would have those rods and holders.
OP
Rio_Grande
Platinum Member
- Joined
- Dec 11, 2007
- Messages
- 555
that is it jj,,, wonder how manny of yhose rods it would take to cut up a catapillar 60 scraper? next project.
The compact style holders like this are a little more comfortable to use..
oxyarc.com - Products
Do you have a large enough oxygen supply to run burning bars? A .540 X 10' 6" burning bar will burn for 4 1/2 minutes and consume 20 cubic feet of oxygen per minute at 90 psi.
A single T oxygen tank holds roughly 335 cubic feet of oxygen and would be empty after the 4th bar..
oxyarc.com - Products
Do you have a large enough oxygen supply to run burning bars? A .540 X 10' 6" burning bar will burn for 4 1/2 minutes and consume 20 cubic feet of oxygen per minute at 90 psi.
A single T oxygen tank holds roughly 335 cubic feet of oxygen and would be empty after the 4th bar..