BT750C Boom cylinder seal kit

[PKSHARP]

Folks. I have a B20 with BT750C backhoe. The boom cylinder is leaking. Messicks and my local Kabota dealer says Kabota does not sell that seal kit anymore?? Anyone know of a replacement part (its 75591-22300 in the Messicks online diagram) ?

Also, when removing the cylinder pins anything special to be aware of? looks like my ford, remove retaining bolt and knock.

thanks for any help and advice

kevin

 

[Roadworthy]

Kubota likely didn't make the seal, nor did they make the ram. The seal should be available from any local bearing or hydraulic shop. If you're uncomfortable performing the repair yourself a local hydraulic shop can probably do the whole job and you'll end up with a like new cylinder.

 

[Vaquero]

I've gotten cylinder kits here Hydraulic Pumps & Drive Motors > Bobcat, Case, John Deere, New Holland, Scat Trak, and more! | Loader Parts Source.com for a third of what a dealer charges.

 

[PKSHARP]

Thanks dropped off the cylinders at local hydraulic shop. Seams none of the Kabota dealers or online parts houses can cross referance the seals.

R/Kevin