Brush Cutter Identification

[Butch T]

Hi All,
Hopefully someone can shed some light on a brush cutter I recently purchased. I don't know the make or model. Couldn't find a tag or label. I do know the original color was green. I have attached pictures for review.

 

[LD1]

There are no pictures attached

 

[Butch T]

Sorry about that .... Here they are!

 

[Butch T]

If you look at the photo "paint" you can see pale green paint on the side. There is a tag on the front of the gearbox but it is unreadable.

 

[LD1]

Sorry cant help with the ID.

I would almost bet though, that its obsolete, and you wont ever get parts for it even if you could ID it.

IF you do ever need parts.....its just gonna be a match up by size. Like blades, or an aftermarket gearbox or tailwheel. Really thats about it....the rest is just metal to need fabbed or welded if it breaks

 

[TerryR]

It looks homemade to me, but others may recognize it.

One point -- that looks like a rigid top link, and there is no give visible anywhere in the frame. If so, something's likely to bend or break when you run through a dip.

 

[Butch T]

Thank You. I have used it and it works well. I was wondering if I should add the bracket like they have on the King Kutter where the top link attaches.

 

[TerryR]

I'd think a link like that, or even just a length of chain instead of the stiff upper arm, will work.

 

[ptsg]

+1 for the chains. Ditch the bars and run some chains. Brush cutters shouldn't have bars in there.

 

[BigGG]

+1 for the chains. Ditch the bars and run some chains. Brush cutters shouldn't have bars in there.

View attachment 815421

I agree. Make sure the chains can't get to the drive shaft.