Branson & Kubota BH76 backhoe ripper

[Mcaanda]

Picked up one last week... I might be able to assist if still needed.

 

[sidecarist]

I too would be interested to know if they fit the Branson version of the BH76. Not so much in the quick connect, but in the trenching bucket...

 

[Aquamoose]

Awesome! I'm eager to know more. Do you have a Kubota BH76? Any measurements so I can compare?

 

[Branson Bob]

Here is a primitive dimensional drawings showing my Branson/Ansung BH76 bucket.

Aquamoose, were you ever able to confirm that the BH76 on the Kubota is the same as the one on the Branson?

I want to buy a 6" trenching bucket and want to make sure I'm buying one that fits.

Thanks!

p.s. - If the drawing isn't clear the distance between pins (centers) is 5.5", the pin diameter is 1", and the dipper width is 4.375"

 

[Aquamoose]

Never did hear if they would be compatible. I fabricated my own ripper.

 

[Branson Bob]

Never did hear if they would be compatible. I fabricated my own ripper.

Thanks for the quick reply Aquamoose.

I'm gonna call Messick's and BXpanded to see if they have any information.

I'll let everyone know what I find out.

 

[Aquamoose]

Hope you’ll have better luck!

 

[Aquamoose]

Figured you can use this drawing with measurements when you communicate with BXpanded. Let me know how it goes!

 

[Branson Bob]

Thanks Aquamoose. I have that same drawing!

BTW earlier in this thread it seemed like someone was saying that the dimensions were on BXpanded's website but I couldn't find it.

Anyways yes, I'll report back after I speak with them. :thumbsup: