1948berg
Gold Member
- Joined
- Feb 3, 2006
- Messages
- 410
- Location
- Southern Norway
- Tractor
- A Fergie-MF 35 gas- Mf 165- Mf 6161- Unimog- Fiat 880
Boys
- Thread starter 1948berg
- Start date
- Views: 1637
gordon21
Veteran Member
If the second pix is a PTO attachement, then I want one too!!!!
With something like that, who needs a dinky 10" table saw from Home depot.
With something like that, who needs a dinky 10" table saw from Home depot.
OP
1948berg
Gold Member
- Joined
- Feb 3, 2006
- Messages
- 410
- Location
- Southern Norway
- Tractor
- A Fergie-MF 35 gas- Mf 165- Mf 6161- Unimog- Fiat 880
scott_vt
Super Member
- Joined
- Oct 5, 2004
- Messages
- 7,446
- Location
- east wells,vt
- Tractor
- 1986 MF 1040, 1942 Farmall A, 1949 Farmall Super A
Good Evening Gunnar,
Great pics as always !
The boys would be the pup in the caboose !
Great pics as always !
The boys would be the pup in the caboose ! 
Cliff_Johns
Elite Member
Some how I don't think either saw meets OSHA requirements.
Thanks for taking the time to post these.
Cliff
Thanks for taking the time to post these.
Cliff
midlf
Platinum Member
1948berg said:
Think about the weight of that table saw. It can withstand the pull of the belt without moving.
Egon
Epic Contributor
Many thanks for the pictures.
Keep them coming!
Keep them coming!
The saw in the second picture was quite a sight.
The saws are one of my favourite things to watch.
First off, the gril driving the engine running the saw couldnt have been much over 12 year old. Second, thats one mean blade, and its going mighty fast. The guys were stepping through the drive belt while it was moving, and reaching across the blade.
They used wedges to move the logs (2-3' dia) into the right place.
When the blade found a knot in the wood the belt would be stretched tight on the input side transmitting the power, and the slack side would drag along the ground, absolutely no slip atall.
BTW, everything is done with steam, lifting the logs, powering the equip, everything.
The saws are one of my favourite things to watch.
First off, the gril driving the engine running the saw couldnt have been much over 12 year old. Second, thats one mean blade, and its going mighty fast. The guys were stepping through the drive belt while it was moving, and reaching across the blade.
They used wedges to move the logs (2-3' dia) into the right place.
When the blade found a knot in the wood the belt would be stretched tight on the input side transmitting the power, and the slack side would drag along the ground, absolutely no slip atall.
BTW, everything is done with steam, lifting the logs, powering the equip, everything.
Joe1
Platinum Member
I was looking, but I couldn't find the OSHA booth. Did I miss it?
In the past, there were certainly a lot of severed limbs and limbs torn out with the exposed blades and belts. We don't need more Government regulation, but OSHA has probably save a lot of lives.
Anyway, great pictures of interesting OLD equipment.
In the past, there were certainly a lot of severed limbs and limbs torn out with the exposed blades and belts. We don't need more Government regulation, but OSHA has probably save a lot of lives.
Anyway, great pictures of interesting OLD equipment.
