Box Scraper Box Blade Size for Kubota B7500

   / Box Blade Size for Kubota B7500 #1  

Old Blevins

New member
Joined
Dec 31, 2009
Messages
15
Location
south of Everett, WA
Tractor
Kubota B7500
I've done some searching in the forum, but haven't found anything very conclusive. I'd like to get a 5' box blade to cover the wheeltracks of my B7500, but want to be sure that's not more box blade than it can reasonably handle. The B7500 has 21 HP, and can lift 615 lbs at the lift points (480 24" behind them). Our soil is mostly dirt with a good supply of small/medium rocks.

Any advice on whether the 5' is okay or too big for this tractor? I'm thinking since it may be marginal, I should probably focus on 3 ripper BBs, but would prefer 4 rippers if it could manage it.
 
   / Box Blade Size for Kubota B7500 #2  
My advice would be go with the 5' with four ripper teeth, but make sure that each tooth can be raise independent of each other. Rippers that are set to deep can slow or stop a smaller horse power tractor.
DevilDog
 
 

Tractor & Equipment Auctions

71066 (A49346)
71066 (A49346)
3000 Gallon Black Poly Water Tank (A49461)
3000 Gallon Black...
2018 GENIE GTH-636 TELESCOPIC FORKLIFT (A51242)
2018 GENIE GTH-636...
2012 SULLIVAN PALATEK AIR COMPRESSOR (A51222)
2012 SULLIVAN...
2018 Terex RL4 4000W Towable Light Tower (A49461)
2018 Terex RL4...
RIGID 150 PSI AIR COMPRESSOR (A50854)
RIGID 150 PSI AIR...
 
Top