Box Scraper Box Blade on a Mahindra 28 XL HST

   / Box Blade on a Mahindra 28 XL HST #1  

BudMan5

New member
Joined
Jun 2, 2014
Messages
12
Location
SW MO
Tractor
Mahindra 28XL HSTJD 915E and JD D140
I need a box blade scraper and found a good deal locally, BUT! I have no experience with them. The one I am looking at is 6 foot wide and I am wondering if that is suitable for my tractor. If not, what size should I look for?

Thanks in advance!
 
   / Box Blade on a Mahindra 28 XL HST #2  
Your 28XL is similar to my TC29DA as to size and specs. The standard width on your tractor is ~54.3". You want a box blade wider than your footprint. I have had no problems with my 60" box blade; I could have gone a little wider; a lot depends on intended use and type of dirt you will be engaging. Heavier is better.
 
   / Box Blade on a Mahindra 28 XL HST
  • Thread Starter
#3  
I appreciate the reply and from everything I am reading it looks like I need to follow your lead.
THANKS!
 
   / Box Blade on a Mahindra 28 XL HST #4  
A 60" would be a good match for your tractor, as heavy as you can afford. I highly recommend a ROBB.
 
 

Tractor & Equipment Auctions

2008 Isuzu NPR-HD Landscape Dump Truck (A50323)
2008 Isuzu NPR-HD...
Gehl Mix-All Mill (A50515)
Gehl Mix-All Mill...
2023 CATERPILLAR 259D3 SKID STEER (A51242)
2023 CATERPILLAR...
CATERPILLAR 299D3 SKID STEER (A51242)
CATERPILLAR 299D3...
1043 (A50459)
1043 (A50459)
2019 Ford F550 4x4 Bucket Truck with Altec AT41 Boom - 46FT Working Height and Jib Winch (A52128)
2019 Ford F550 4x4...
 
Top