Bought a new GC2300

   / Bought a new GC2300 #1  

bill177

Silver Member
Joined
Aug 12, 2006
Messages
194
Location
Upstate New York
Tractor
Massey Ferguson GC2300
Today is my first day of retirement and I bought myself a present - of course my wife had input for this also.

After being ignored by various tractor dealers in the Albany, NY area - I found Abele Tractor, a Massey Fergusen dealer, that wanted a sale and worked with me to make it happen. I am delighted, to say the least.

The new tractor gets delivered the middle of next week. I also ordered a rototiller for it (48 inch). That should be arriving in a couple of weeks. Next spring I'll get a 60" MMM and a post hole digger.

The next project is to build an addition to my small barn to store the tractor and implements in. In the interim - the Tahoe gets an extra coat of wax and lives outside.
 
   / Bought a new GC2300 #2  
Congratulations...I think you will be very happy. My little GC does everything I ask it to do and often way more than I expect. Did you get a loader with it? What tiller did you get?

What kind of projects do you plan to perform with it?

W
 
   / Bought a new GC2300 #3  
Good Luck on your new tractor. You have to watch ground clearance if you go off road over stumps, rocks, etc. I have the TLB model with no mower, and even though I'm carefull, I have a small ding in my hydraulic filter under machine, but newer GC2300's are suppose to have a guard mounted under filter to protect it. This is located on the rear axle on right side mounted horizontally. My neighbor had his broken by someone who borrowed his tractor [ GC2300] and ran it out of fluid. It was very expensive to get fixed. plowking
 
   / Bought a new GC2300
  • Thread Starter
#4  
Since you asked: I plan to use the GC2300 for my garden (ordered the Massey 48" tiller) and loader work around the place for woods and brush clearing and leveling the lawn (about 2 acers). I'm getting on in years and the showel and yard trailer are too much for mulching - good work for the FEL.

I'll mount my snow plow blade on the FEL arms for the winter - no hydraulics, just the blade. Hope the tractor can do the hill as well as my Tahoe. There is a big weight difference (6000 lbs vs. ??). I did get the bar tires on it. The Tahoe only has regular tires on it - but never slipped or balked at plowing going up the hill, so I don't expect any problems. I never allow the snow to accumulate more than six inches before I plow. Sometimes have to plow a couple of times during a storm - but this makes for easier and faster plowing for me (my experience).

Next summer I may add a MMM for the wife to use when things are dry and not soft. Also a post hole drill.
 
   / Bought a new GC2300 #5  
Good Luck With Your New Tractor, Good Bunch Of Guys At Abele Tractor, Did You Talk To Jim?
 
   / Bought a new GC2300 #6  
Hey,

Congrats on your new purchase!! You cant go wrong with your choice!! MF all the way!! Pics please??
 
   / Bought a new GC2300 #7  
Congrats on your new purchase! I picked mine up in April and couldn't be happier with my purchase!
 

Tractor & Equipment Auctions

Case SC Tractor (AS IS) (A50774)
Case SC Tractor...
2013 FREIGHTLINER EXT CAB SERVICE TRUCK (A51406)
2013 FREIGHTLINER...
Walk-Behind Automatic Seed Spreader (A51691)
Walk-Behind...
Ditch Witch 350SX Diesel Ride-On Hydraulic Trencher (A50322)
Ditch Witch 350SX...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2000 Gallon Fuel Tank W/Pump (A50774)
2000 Gallon Fuel...
 
Top