Bought a Branson

   / Bought a Branson
  • Thread Starter
#11  
Dave is she going to fit into the garage or are you building a custom domicile?
48' x 56' x 12' with (2) 16' x 10' Overhead Doors in the front and (1) 12' x 10' Overhead door in the back. Ridge light and eave lights.
 

Attachments

  • shed east 1.jpeg
    shed east 1.jpeg
    427.9 KB · Views: 122
Last edited:
   / Bought a Branson #12  
Congratulations on a nice tractor! I hope you have many years of trouble free service.
 
   / Bought a Branson
  • Thread Starter
#13  
i will give you a few things to watch out for as I've seen it a few times over the last three years on the 15 series cabs( yours should have the updated parts already being only a year old), the clutch rod on some of these units have broken before due to fast shifting on the forward an reverse shifter, yours should be updated already being only a year old but just in case take it easy on shifting into forward and reverse( they updated this clutch rod in may of 2019),
the Hst pedals will come out of neutral over time and you will have to adjust them back, i don't know why the 15series cabs do this more than others but they do, just under the pedal area under the tractor you will find a turnbuckle style linkage this will allow you to adjust back the pedals, ( they changed the turnbuckle to a thicker stronger unit should prevent the pedal drift but it may still occur - updated June 2018 for all models 00/10/15/20/25/35)
be careful filling your fuel tank i have had customers drop a heavier fuel can on top of the tank and break/crack the fuel outlet nipple from the jarring motion causing fuel to leak. i think that everything i have ever noticed on the 15 series cab model( they reinforced the mounting brackets for the tanks so your should have them too)( updated Jan 2020)
Thanks - posts like this are the best!
 
   / Bought a Branson
  • Thread Starter
#14  
Awesome deal for a cabbed tractor. Had to look it up but a 36 hp and 4 cylinder engine looks like a good combination.

Were you able to pay cash or get a loan?
Paid cash. 42hp I might sell my 25hp LS now.
 
   / Bought a Branson #15  
Congrats! Looks like you got a great deal on a very nice tractor.....
Don't sell the little LS.... as soon as you do, you will miss it and have something to do that the big tractor won't fit! I have experience in that.... sold the little MT125 and missed it almost immediately!
 
   / Bought a Branson #18  
That's a great looking tractor, now you just need some seat time. Have fun.
 
   / Bought a Branson #19  
Asteral........this 4215 has the same dash as my neighbor if that helps.

 
   / Bought a Branson
  • Thread Starter
#20  
Congrats! Looks like you got a great deal on a very nice tractor.....
Don't sell the little LS.... as soon as you do, you will miss it and have something to do that the big tractor won't fit! I have experience in that.... sold the little MT125 and missed it almost immediately!
I took the step off the LS and am getting a new one fabricated. The old was like 8" wide which made for a very challenged mount and dismount due to my lame leg. The new step will be close to 12" wide so I can get both feet on the step at the same time - which is required for me currently.
 

Tractor & Equipment Auctions

2- SMALL PIPE RACKS (A48992)
2- SMALL PIPE...
2012 CATERPILLAR CS44 SMOOTH DRUM ROLLER (A50458)
2012 CATERPILLAR...
2005 INTERNATIONAL DURASTAR 4300 (INOPERABLE) (A48992)
2005 INTERNATIONAL...
2012 JACK COUNTY 130 BBL VACUUM TRAILER (A48992)
2012 JACK COUNTY...
2014 UTILITY 53X102 DRY VAN TRAILER (A50046)
2014 UTILITY...
2019 CATERPILLAR 308 CR EXCAVATOR (A50458)
2019 CATERPILLAR...
 
Top