Bolts for ROPS

[BlacknTan]

I'm perfectly capable of being wrong myself Rob!

Just was lucky this time. When I put the Metric pitch gauge on the bolt, 1.4 was real close, but I knew that couldn't be right. The AS 18 was perfect!
Running a 9/16-18 tap through the nut with a close fit and no resistance sealed the deal!

I thought it SHOULD have been Metric myself!

 

[98ramtough]

14mm was too big. 12 mm 1.5 fine thread is close, but it doesn't line up on the threads.... What else to try?

 

[98ramtough]

Never did find the right bolt for this. Anyone with a B7100 want to take a bolt out of the rops bar where it mounts to the tractor and tell me what size it is? Pretty please

 

[Jw5875]

Bolt for bottom ROP's bracket on my L3400 is tapped in a blind hole for
M14 - 1.5 - 30MM. (Factory bolts) Kubota L3400 / L2800 Part # 01138-51430

If anyone is interested in my experience with Wood's on a 4 Pt. sub-frame regarding bolt's, M14 - 1.5 - 50MM (Grainger has all bolt's #6BA46 Pg. 2262)


JW5875

 

[crowsnest2002]

I know this is an extremely old topic, but was in the same predicament with a 96 kubota b7100 hst. So for historical reference to anyone in the future.

Class 8 M12 - 1.75 x 40
Class 8 Hex nut M12 1.75 for lock nut