Bleeding TC29

   / Bleeding TC29 #1  

tow653

Gold Member
Joined
Apr 27, 2012
Messages
333
Location
Gasconade County,Mo
Tractor
New Holland TC29,Ford Jubilee
Think I had a valve stem pour into fuel tank.it kinda dissolved and clogged fuel filter. Changed fuel filter and am trying to bleed air out of lines. Cracked vent on top of pump and have fuel coming out. Cracked lines at injectors and am not getting fuel. Not wanting to burn starter up so only do for 20 or 30 seconds. How long should it take to get fuel at injectors? Or any other advice or tips? Thanks, Tim
 
   / Bleeding TC29 #2  
Not very long.. make sure the throttle is wide open & the shut off is in the run position..
I hate to say this but, maybe a sniff of starting fluid will help spin it faster..
Does the system have a lift pump or is it gravity fed TO the injection pump??
Maybe pressurizing the tank will help..
 
   / Bleeding TC29
  • Thread Starter
#4  
Takes forever if the wire on the fuel solenoid comes off. Glad it's back running
 

Tractor & Equipment Auctions

2025 12v Diesel Pump, Hose And Nozzle (A50323)
2025 12v Diesel...
2020 Utility Trailer Manufacturing, 53' Trailer (A52384)
2020 Utility...
2005 Dodge Caravan Van (A51694)
2005 Dodge Caravan...
WACKER NUESON PUMP PT2A (A52472)
WACKER NUESON PUMP...
2020 International MV607 2,000 Gallon Water Truck (A50323)
2020 International...
2004 Mercedes Benz E-Class Sedan (A50324)
2004 Mercedes Benz...
 
Top