Mowing Blades for mower

[149owner]

Well, I called the Stealer this morning and asked if he had Cat1 to Cat2 bushing adaptors and he told me he had many different bushing sizes but didn't know what size I needed so I'll have to wait until the Gators get here to find the size adaptors I need. I would have thought there is one size for a Cat1 to Cat2 adaptor. Maybe I talked to someone that didn't know any more about tractors then I do!

 

[MOPAULY]

Well, I called the Stealer this morning and asked if he had Cat1 to Cat2 bushing adaptors and he told me he had many different bushing sizes but didn't know what size I needed so I'll have to wait until the Gators get here to find the size adaptors I need. I would have thought there is one size for a Cat1 to Cat2 adaptor. Maybe I talked to someone that didn't know any more about tractors then I do!

There are multiple Cat 1 to 2 and 0 to 1 adapters, at least from what I saw at TSC. All I can say is GOOD LUCK, take measurements first.

 

[638]

MOPAULY,

What was the problem with the blades on your 54" deck? I've got a 54"r and was going to order a set.

ron

 

[MOPAULY]

MOPAULY,

What was the problem with the blades on your 54" deck? I've got a 54"r and was going to order a set.

ron

Ron,

I couldn't find the correct bushings to make it work. I could fine ones that would fit the blade inside diameter, but not the spindle outside diameter. Even when I put 2 bushings together it wasn't a perfect fit. I suppose I could find custom bushings somewhere for it, but it's not worth the hassle to me at this point, I'll stick with the factory options.

 

[149owner]

My "Gators" arrived last night so I went to the Stealer this morning and found the bushing I needed for $0.85. The number on the bushing is P2004. Maybe the 54" mower has a different size spindle since mine is a 60" deck.

 

[Harry c]

Same bushings fit my 54"
Blades work great!

 

[Fug1000]

I havent see anyone with a 72 inch MMM speak up. Do they make mulching blades for the 72inch? Either Gator OR Kubota?

 

[vrman]

My "Gators" arrived last night so I went to the Stealer this morning and found the bushing I needed for $0.85. The number on the bushing is P2004. Maybe the 54" mower has a different size spindle since mine is a 60" deck.

Is that a Kubota dealer? I can't seem to find any in my area that carry the bushings. Anyone know of an online retailer that I can order them from?

 

[vrman]

Found one! Tractor Parts Inc. (or TPI) Woohoo! Hopefully I'll get the bushings by Friday so I can put my gators on!

 

[149owner]

Glad you found them. I did get mine at the Kubota dealer.