enterprisebbc
Silver Member
Been looking to buy a diesel fuel contaner. Most I understand are no good but dont know which one pours and handles the best with all that EPA crap around. Any suggestings?
Best diesel 5 gal fuel can?
- Thread starter enterprisebbc
- Start date
- Views: 63400
k0ua
Epic Contributor
I don't have one but these look good.. (so does Jill
)[ame=http://www.youtube.com/watch?v=6UHHuVGtFGI]No Spill Jill - Full Demonstration - YouTube[/ame]
James K0UA
rswyan
Super Star Member
- Joined
- May 12, 2004
- Messages
- 11,437
- Location
- Northeast Ohio
- Tractor
- Kubota B2910, Cub Cadet Pro Z 154S, Simplicity 18 CFC, Cub Cadet 782
If you make it up north (Canada) pick up a normal fill spout for whatever you get - Canadian Tire carries one with various rings to fit a variety of cans.
In some ways, our northern neighbors have less of a nanny state than we do down here ....
OP
enterprisebbc
Silver Member
Looks like the no spill is NG. The other thing is thr flow rate. The best I have found do 3 gal. p.min. Yea, I think I prefer Jills can.
OP
enterprisebbc
Silver Member
Do they ship? Must have a web site. I'll take a look
carlmill
New member
The No-Spill containers in the second post are very good. No leaks, drips, pours fast: not cheap though.
Carl
Carl
moored4
Veteran Member
- Joined
- Jan 31, 2011
- Messages
- 2,311
- Tractor
- Kubota l245dt, l3540, 8N
ACE Hardware has them.
crash325
Elite Member
droy
Silver Member
The latest "Farm Show" publication displayed a link to a small company selling vents for portable fuel cans. These appear to be the same type that were installed on cans back in the "good ol days", and almost as expensive as the whole can from back then, ($4/per IIRC). If I can find the rag, will post the link in case anyone is interested.
Probably illegal to retrofit a modern day can, but if you still have some of the older cans laying around, or like me, just disgusted with the now-a-day setup.......
By the way, Jill does appear to have a nice display of.....er......ahem.....cans!!!!?
Probably illegal to retrofit a modern day can, but if you still have some of the older cans laying around, or like me, just disgusted with the now-a-day setup.......
By the way, Jill does appear to have a nice display of.....er......ahem.....cans!!!!?
grnspot110
Elite Member
- Joined
- May 16, 2007
- Messages
- 2,673
- Location
- MO
- Tractor
- John Deere 1944- H, 1961 Cub Lo-Boy, 2016- JD 2025R, 2018- JD X580
Vents are simple! Drill a 1/2" hole where you want the vent (I used my shop vacuum as a blower from the spout end while drilling), run a wire through the can, pull a short tubeless-tire valve stem through. Remove the core, cap it when you don't need to vent! ~~ grnspot
