Belt Replacement

   / Belt Replacement #1  

quasi

New member
Joined
Sep 1, 2011
Messages
6
Tractor
Kioti CK20HST
I've lost the fan belt while mowing and promptly mowed over it so I can't take it to get it matched. My dealer only has the Kioti part number and is out of stock until he orders parts "in a couple of weeks". Does anyone know an aftermarket belt size for a CK20HST?
Thanx,
Jim
 
   / Belt Replacement #2  
If you can get the Kioti fan belt part # you may be able to get one from an auto parts store, phone around and see if this is possible. My local auto parts store will get me parts for my lawn tractor including belts. Good luck with your search. :)
 
   / Belt Replacement
  • Thread Starter
#3  
Mousefield,
The Kioti part number doesn't mean anything to anyone but Kioti Parts. Their number is E5760-72532 but that doesn't help. I'm hoping someone has replaced theirs using a "regular" belt that I can get locally and before next month.
Thanx,
Jim
 
   / Belt Replacement #4  
First of all take a piece of the old belt (surely you have a small piece of it left) and measure the width of it. Now loosen the adjusting device on your tractor (usually the altenator) and close it up to the shortest it will go and then take a piece of rope and run around the pulleys to get as accurate a measure of length as you can and add approx. 1/2" to this measurement. Any decent auto parts store can look your belt up by these 2 sizes and get you going again.
 
   / Belt Replacement #5  
First of all take a piece of the old belt (surely you have a small piece of it left) and measure the width of it. Now loosen the adjusting device on your tractor (usually the altenator) and close it up to the shortest it will go and then take a piece of rope and run around the pulleys to get as accurate a measure of length as you can and add approx. 1/2" to this measurement. Any decent auto parts store can look your belt up by these 2 sizes and get you going again.

Or a TSC store.
 
   / Belt Replacement #6  
It is a metric belt.
You can try a 1/2 X 42 or a 3/8 X 41
Or I have them in stock for six dollars and change plus shipping.
 
   / Belt Replacement #7  
It is a metric belt.
You can try a 1/2 X 42 or a 3/8 X 41
Or I have them in stock for six dollars and change plus shipping.

A good answer every time. Do you still have those little toy Kioti tractors? I have already bought four from you but have three more grandchildren on the way.
 

Tractor & Equipment Auctions

2009 Freightliner M2 106 MedTec Ambulance (A51692)
2009 Freightliner...
2007 DEUTZ D 2011L03 MOTOR (A52472)
2007 DEUTZ D...
2004 CATERPILLAR 140H MOTORGRADER (A51406)
2004 CATERPILLAR...
2002 FREIGHTLINER FL70 DUMP TRUCK (A51406)
2002 FREIGHTLINER...
2015 KUBOTA 1140CPX RTV (A51406)
2015 KUBOTA...
2012 UNVERFERTH 13-INCH REAR SPACERS FOR 10 BOLT HUB (A52748)
2012 UNVERFERTH...
 
Top