BCS Tiller Attachment

[Mattc8832]

Anyone know where or how I can check to oil level in my BCS Tiller Attachment? I cannot find a plug on it. Thanks

 

[kevingweq]

It is on top of gear box ,shields have to be removed , If it is more than 2" below full ,add gear oil until it is almost full ,

 

[farmerboybill]

To add to Kevin's comments -

Those 1 quart squeeze bottles work best for the 90 weight gear oil. The oil is considerably more expensive, but most guys don't need much gear oil. I buy a squeeze bottle and refill it with a bigger jug. When it cracks, I buy another one. I tried using a funnel, but the oil is so thick and the hole is so small that it doesn't work well.

 

[shallowwatersailor]

This might work. I have had good luck with a hand pump that screwed to the gear oil bottle for filling vehicle differentials while on the ground. You can make the discharge hose as long as needed.