Backhoe for 4410
- Thread starter asetech
- Start date
- Views: 5171
rockyridgefarm
Elite Member
Both are discontinued. But you stilll might find one. The 47 was about $4000 and $5000 for the 48 Vries wildly
The were replaced by the 447 and 448. Try and go to the 48 or 448 if at all possible. Yjere is only 1 foot greater reack, but they are upwardly compatable.
But a good enough deal on a '7' would be a good way to go!
The were replaced by the 447 and 448. Try and go to the 48 or 448 if at all possible. Yjere is only 1 foot greater reack, but they are upwardly compatable.
But a good enough deal on a '7' would be a good way to go!
jeffinsgf
Veteran Member
asetech said:
When you put the two side by side, the 47 (or the newer 447) look like Tonka toys. Go with the 48 if you can find one. The 448 will fit the 4410, but I like the 48 better (despite the spec sheet) and if you can find one, you're likely to get a better deal. Use the machine finder on Deere's website. It will search for them in dealer's inventory starting from where you are and working out. If you find one, but you want to work with a local dealer, just tell your dealer where it is and they can swap for it.
