Backhoe flips with trailer
- Thread starter JayC
- Start date
- Views: 2059
Bedlam
Veteran Member
- Joined
- Feb 28, 2005
- Messages
- 1,878
WOW NOT much left of the wheels or hubs on that one.
tinkertoys
Bronze Member
- Joined
- Jul 24, 2007
- Messages
- 83
iF THAT RED P/U WAS PULLING THE TRAILER IT LOOKS LIKE A 1/2 TON. If that is so he wasn't very smart. Looks as backhoe probally was to far back on the trailer.
QRTRHRS
Elite Member
I would take this as an example of why it pays to do things correctly. Not knowing all the particulars, the driver just may have had his ducks in a row. Someone might well have cut him off and when the driver reacted, they may well have just lost it.
In looking at the video, I would have had the machine chained differently though it stayed with the trailer. It might have shifted backwards some when the trailer flipped.
I know of one last summer/fall. Guy was taking his newly restored tractor to a show and ended up exactly like that. He got cut off and lost it. Tow vehicle, trailer, load, securing devices were all in order.
To bad, did a number on his nice tractor too.
In looking at the video, I would have had the machine chained differently though it stayed with the trailer. It might have shifted backwards some when the trailer flipped.
I know of one last summer/fall. Guy was taking his newly restored tractor to a show and ended up exactly like that. He got cut off and lost it. Tow vehicle, trailer, load, securing devices were all in order.
To bad, did a number on his nice tractor too.
vettemanwight
Gold Member
- Joined
- Feb 11, 2007
- Messages
- 259
Looks as though he lost both hubs on right side of trailer. Overall I would say he had load secure enough on trailer. V
rcrcomputing
Platinum Member
I was waiting to see the tractor start. 
Scooby074
Super Member
Looks like it may have been a rental in the video. Hope he took the full insurance!