Back hoe bucket has two pin holes??

   / Back hoe bucket has two pin holes?? #1  

futuresweets10

Silver Member
Joined
Jun 6, 2010
Messages
125
I noticed that when I got down bellow about 3ft the bucket didnt tilt out enough to be able to dig deep. I moved the pin from one slot to the other to allow the bucket to swing out further, but obviously it wont fold in flat against the arm now (which isnt a problem). What is the other setting for, as it seems to be worthless for digging.
 
   / Back hoe bucket has two pin holes?? #2  
I find the "inner" setting handy for grasping things with the bucket...
My bucket will nearly touch the dipper and I can grab branches and most anything else between the dipper and bucket... Also handy if your hole is deep enough to dig under a pipe or other utility.
 
   / Back hoe bucket has two pin holes?? #3  
I noticed that when I got down bellow about 3ft the bucket didnt tilt out enough to be able to dig deep. I moved the pin from one slot to the other to allow the bucket to swing out further, but obviously it wont fold in flat against the arm now (which isnt a problem). What is the other setting for, as it seems to be worthless for digging.

JD calls one the power digging position and the one that folds nearly to the arm is a setting for loading dump trucks with the back hoe.

The Power setting is better for digging up stumps i have found.
 

Tractor & Equipment Auctions

2014 DRAGON 500 BBL FRAC TANK (A53843)
2014 DRAGON 500...
2002 Mack CX613 Cab & Chassis (A53117)
2002 Mack CX613...
2010 Ford F-750 Stellar 10621 10,000LB 5 Ton Crane Mechanics Truck (A51692)
2010 Ford F-750...
2012 CATERPILLAR 316EL EXCAVATOR (A51406)
2012 CATERPILLAR...
2014 Bomag BW900-S50 (A47477)
2014 Bomag...
20 ft. Shipping Container (A53117)
20 ft. Shipping...
 
Top