back blade manufacture

[frank_f15]

attached is photo of back blade that came with my tractor(pre owned) there are no nameplates on it or any markings. i beleive it is original color as it was too new and not used enough to warrent repainting. it is no more than 4 years old and i have had it for almost 2 years. any idea of who paints theirs implements this color?

 

[Buster57]

Cat?

 

[DUMBDOG]

Looks more like a Steiger color.

 

[Soundguy]

I'm trying to find info on my boxblade as well.. mine was a roadside special.. 100 bucks, and looked good and sturdy.. no telling how old it is. I can partially read the name OXEN through the many coats of paint on it.

Any ideas?

Soundguy

 

[theboman]

My box blade is a no name with the dealer's name on it and it's Landspride / Kingcutter color. I hope to use it in a few weeks.

 

[nicklan]

frank_f15,

Looks like a King Kutter.

Nick

 

[frank_f15]

Really? i bought a kk finish mower about 8 years ago and it was nothing like the green on the back blade. will have to check that out . thanks for the input.

 

[Wheeldog]

Looks like a King Kutter.

I'd have to agree with Nicklan. I have a 6' KingKutter blade but it is buried in storage right now so I can't take a look. The shape of the frame and that tube spar look the same as on my blade.

Rob

 

[tld]

My brother in law has a box blade with the name "Big Oxen" on the side. If I remember this weekend I will see if anything else can be found. It was a roadside special also.

 

[Mosey]

Based on a comparison of your picture and <A target="_blank" HREF=http://www.kingkutter.com/RearBlades.asp>this picture</A>, I'd say it's a King Kutter. Somebody probably repainted it.

 

[Woodbeef]

Be hard to place it with out an id plate. Blades of that type and size are of a fairly common design,that are copied by more than one manufacturer.

 

[Hydraman]

A Canadian outfit by the name of Schulte, if it is original paint.
They make snow-blowers, mowers, and other stuff. What I have seen, they seem to be pretty well made.