B7610 rear wheel noise fix

[digger2]

just in case anybody has a hard "creaking" noise coming from the rear wheels
of their B7610 or similar machine w/the hex shaped rear axles that you can widen the wheel spacing on,before you take it back to the dealer($$$) pull
the wheels and flanges off,and put some anti-seize on the axle and the inside of the flanges,then reassemble.It worked for me,no more "creaking" noise.I
have to do this about every 6 months.I think it may have alot to do with the
950# woods bh hanging off the back.This could be "old" news but just in case
it could help somebody.
digger2

 

[EastTexFrank]

With me it was because the the wheel had loosened off a little bit. I have to tighten the bolt on the inside that holds the wheel on to the axle every 3 months or so.

 

[dillo99]

Yea I get this too on my b7500 - I just slip my arm in there with a ratchet every couple months and tighten them up and the noise disappears. Can be done pretty quickly and easily.