B7100HST hydraulic pump specs

   / B7100HST hydraulic pump specs #1  

coralhead

Silver Member
Joined
Nov 24, 2012
Messages
198
Location
Floyds Knobs, IN
Tractor
kubota B7100hst Branson 4520r Massey Ferguson 135 diesel
Can anyone tell me what the auxilary hydraulic capacity is when connecting to the manifold block? What is the gpm on the pump and the pressure relief valve set at? I am wondering if it would run a small log splitter or has anyone tried this. The log splitter has a directional control valve. I am thinking that if the tractor can run a FEL than it may be able to split wood.

Any thoughts?
 
   / B7100HST hydraulic pump specs #2  
Welcome to TBN. I have a B6100, similar tractor but smaller engine. I would think the pump would split wood (runs 1200 psi?) but it only puts out 3gpm or so. This would mean a really slow cycle time. Search around on this site and you'll see folks have done it with larger machines but the cycle time seems to be the typical complaint. Regular splitters typically have 2 stage pumps.
 

Tractor & Equipment Auctions

2016 Chevrolet Tahoe SUV (A51694)
2016 Chevrolet...
2020 Utility Trailer Manufacturing, 53' Trailer (A52384)
2020 Utility...
(1) HD 24ft Free Standing Corral Panel with 7ft Gate (A51573)
(1) HD 24ft Free...
UNUSED GREAT BEAR 1.5CY SELF DUMPING HOPPER (A51248)
UNUSED GREAT BEAR...
2018 Lexus IS300 Sedan (A51694)
2018 Lexus IS300...
UNUSED CFG INDUSTRIAL MX15RX EXCAVATOR (A51247)
UNUSED CFG...
 
Top