Hello all. i am very new to this and computers. i am on the older side LOL. i am looking for a subframe for my kubota B2910. i would like to put a backhoe on it and dont want to do the 3 point hitch. is there anyone out there who can help. any help would be greatly appreciated. searching the net has been crazy can't seem to find one.
B2910 subframe for backhoe
- Thread starter rickcjb
- Start date
- Views: 4789
TBN Support
TBN Support
- Joined
- Feb 4, 2015
- Messages
- 4,561
Hi and welcome to the forum!
:tractor: I'm moving this thread over to our Kubota section. Someone over there should be able to help.
:tractor: I'm moving this thread over to our Kubota section. Someone over there should be able to help.
rob in ore
Member
The maker of the backhoe probably has the subframe to fit your tractor.
I am very happy with the tractor. I just got a few months ago for a fair price and it only had 141 hours on. I am very impressed with what it can do. Just had to drive it home don't have a trailer took about and hour LOL
Peter 315
Super Member
ovrszd
Epic Contributor
- Joined
- May 27, 2006
- Messages
- 32,246
- Location
- Missouri
- Tractor
- Kubota M9540, Ford 3910FWD, Ford 555A, JD2210
I say again, I think Kubota peaked with that model. All of the replacements since have had less features. Great tractor. Extremely capable and comfortable to use. I mostly did MMM mowing work with mine. Best cutting MMM deck I ever owned.
Jim Nelson
Platinum Member
I think that is real close to the B7800 which I bought new in 2005 and later bought the Kubota BH75 backhoe with sub frame and had it installed by the dealer. As I remember it was right at $7800 out the door. I've done an amazing amount of work with it and would recommend it. If I were you I would talk to the dealer about it. I was ready to buy a 3 point because of the price but am thankful that I chose the sub frame, much stronger unit.
rswyan
Super Star Member
- Joined
- May 12, 2004
- Messages
- 11,414
- Location
- Northeast Ohio
- Tractor
- Kubota B2910, Cub Cadet Pro Z 154S, Simplicity 18 CFC, Cub Cadet 782
I have a B2910 and a BH4692, and like Jim I have done a lot of work with it.
The BH is 3-point ... but it includes a subframe (essentially a couple of straps/flat stock that ties the front and rear halves of the tractor together - and stays installed whether the backhoe is mounted or not ... which is a plus) and a heavy-duty top link bracket.
It's plenty heavy-duty enough ... but something with a four point mount would probably be easier to install and remove.
Hope that helps.
The BH is 3-point ... but it includes a subframe (essentially a couple of straps/flat stock that ties the front and rear halves of the tractor together - and stays installed whether the backhoe is mounted or not ... which is a plus) and a heavy-duty top link bracket.
It's plenty heavy-duty enough ... but something with a four point mount would probably be easier to install and remove.
Hope that helps.