B2150 Hydro peddle adjustment?

Danno · Dec 17, 2000

Seems that the peddle that controls f&R movement on my B 2150 does not fully return to neutral when you remove your foot. I have to give it a little rearward nudge to fully stop forward travel. Any ideas?
Thanks

Bird · Dec 17, 2000

Danno, have you looked at the linkage under the floor. There is an adjuster under there, but I just don't know how to describe it. There's a good chance that if you look at it while someone moves the pedal back and forth, you'll see how to do it.

Bird

fredoroberts · Dec 18, 2000

I have the same tractor and the same problem. I have looked under there and concluded that there is a small hydraulic or shock absorber type of device that returns the pedal to the neutral point. I could not find an adjustment, so I lubed the pedal mechanism. No change. I have learned to live with it and just tap her into reverse when it creeps.

Good luck and please post if you find a fix that does not involve replacing the device.

Danno · Dec 18, 2000

Thanks guys..it might be internal who knows..I can live with it though

Anonymous Poster · Dec 19, 2000

DANNO, DO'NT LIVE WITH IT!!!!!!!!!
You can fix that.... Pull the cover that "hides" your HST filter (the one between your legs should have 4 thumb screws) You will see a threaded rod sticking up with 2 nuts on it thats the adjustment for the spring that returns the hst pedal to neutral.Loosen the jam nuts and tighten the spring as much as you need to then spray some lube on the linkage up under and toward the back right side of the tractor, should be a "V" shaped bracket up under the frame above the front wheel drive shaft rear u-joint (you really got to squirm under to see it) and lube that little round bearing. Also grease up the pedal and that should do the trick........

Danno · Dec 19, 2000

The printer is printing up your post as I type this. Thanks a bunch I just got done plowing snow 8" here in PA and I'll give it the check up this weekend. Sounds like a real solution to the "creeping peddle! Sure appreciate the info.

Kelvin · Dec 22, 2000

I pitch in (thirdly)and say that I have the same problem with my B2150 HSD. I am curious to see how the fix works. Keep us posted. I'll live with mine until probably Spring, but would like to get it working properly if possible.

Kelvin