B1750D battery connection

[matoyan]

Does anyone have a picture or a diagram of where the ground (-) terminal gets connected on the tractor? I bought the tractor apart and I'm trying to put her back together but I can't figure out where the ground goes on the tractor. Yes I know one end goes on the battery, I need the other. Thanks.

 

[JWR]

Does anyone have a picture or a diagram of where the ground (-) terminal gets connected on the tractor? I bought the tractor apart and I'm trying to put her back together but I can't figure out where the ground goes on the tractor. Yes I know one end goes on the battery, I need the other. Thanks.

I have a shop service manual that covers the B1750 thru B2150, that whole series. It would take me some serious effort go dig in the basement to find it. If you do not get info by the time I get back here to check I will go find the sucker for you. A problem is that such a basic thing as that might not be intentionally covered. If it is in there it would probably be some unrelated picture that just happens to show it. Come to think of it, I am not near my B2150's (half a day drive) but there are a lot of these things out there. Someone who has one where they are should be able to go look. I suspect that sort of thing is the same on the whole series.

 

[SDT]

Does anyone have a picture or a diagram of where the ground (-) terminal gets connected on the tractor? I bought the tractor apart and I'm trying to put her back together but I can't figure out where the ground goes on the tractor. Yes I know one end goes on the battery, I need the other. Thanks.

It bolts to the transaxle beside the battery. Cable is probably less than 12" long.

Sorry, no photos.

SDT

 

[matoyan]

Thanks for the responses. I downloaded the WSM, owners manual, and parts manual from the forum and none of them show you exactly where it connects to. They took pretty much every bolt out and through it in a bucket. I’ll try to find the bolt that matches the location on the trans axle and hope for the best. At the end it just needs to be grounded to the machine. If anyone can take a picture, please feel free to send it. Thank you.