CADDIS
New member
I picked up a very used kubota B1750 that is missing the complete 3 PT hitch assembly. I've been looking at this one on flea-bay:
Kubota Compact Tractor Cat 1 3 Point Linkage Hitch Kit | eBay
I'm wondering if this one will work? The specs say the lower lift arms are 19.68 " hole-to-hole and the fixed LH lift rod is 11.81" while the adjustable rod starts at 10". So do any of you Kubota brothers out there have a B1750 or B1550 to measure the factory setup to see if these measurements are within reason? I'd really like a new OEM setup, but I don't think that's going to happen(to expensive), and I can't seem to find any used stuff so far. Thanks. Jim
Kubota Compact Tractor Cat 1 3 Point Linkage Hitch Kit | eBay
I'm wondering if this one will work? The specs say the lower lift arms are 19.68 " hole-to-hole and the fixed LH lift rod is 11.81" while the adjustable rod starts at 10". So do any of you Kubota brothers out there have a B1750 or B1550 to measure the factory setup to see if these measurements are within reason? I'd really like a new OEM setup, but I don't think that's going to happen(to expensive), and I can't seem to find any used stuff so far. Thanks. Jim
