B-7800 hydraulics

[BlacknTan]

I've finally put together everything to install the rear remotes on my B-7800. All I need are fittings and hoses.
Now for the questions..

What type fittings are on the Loader valve (LA402)? (JIC??)
What size are they? Everything appears to be plumbed with 3/8 hose...

The fitting at the tank appears to be different from the rest. The return line goes to the side of the tank. I believe that the thread in the tank is a NPT thread?? But, the 90 degree fitting appears larger than that on the loader valve and the hydraulic block.

Also need a fitting to Tee in my second return to tank line.

Finally, what size Snap-Tite QD fittings are on the loader valve??

Does anyone have a list of fittings for doing this job??

 

[Farmerford]

The Husco valve on my LA 853 loader has -8 O-ring boss outlets and inlets. The pump, tank, and power beyond are fitted with adapters to -8 JIC male flare. The 3/8 hoses then have adapters: -8 JIC female swivel for the loader valve and -6 for the 3/8 hose.

The work ports have adapters for -8 O-ring boss to 3/8 NPT (male). The 3/8 quick disconnects are 3/8 NPT (female) and are screwed to the 3/8 NPT male on the valve. The hoses to the loader cylinders have 3/8 NPT (male) ends to attach to the other ends of the quick disconnects.

 

[BlacknTan]

Thanks FF!