Auxillary lighting for a JD4100

TerryinMD · Jan 28, 2002

I posted a diagram to add <A target="_blank" HREF=http://www.tractorbynet.com/cgi-bin/compact/showflat.pl?Cat=&Board=custom&Number=104412&page=0&view=collapsed&sb=5&o=7&fpart=>auxillary lighting</A> for my JD4100.

Terry

smilingreen · Jan 28, 2002

Terry,
In looking at your diagram, this should work fine with no problems. Looks like a good project. As soon as my canopy comes in, I am installing two lights facing forwards on the front bottom side of my canopy. FEL blocks most of the light right now. Good job!

TerryinMD · Jan 29, 2002

Dave,

After asking the questions, reading, and scratching my head, I figured I needed to share my experiences with TBN. If you have any questions, do not hestitate to contact me.

Terry

TxBillyed · Feb 3, 2002

I like your idea, what if you put on a larger amp say 35 on the 4100.

Bill

TerryinMD · Feb 4, 2002

TxBillyed,

Knowing what I know now (sounds kinda odd, but gramatically correct - anywho /w3tcompact/icons/eyes.gif), I would have ordered the 35 amp alternator. If I ever have to replace the alternator, I would upgrade to get some additional output and make my 4100 look like a Christmas tree. /w3tcompact/icons/wink.gif/w3tcompact/icons/laugh.gif

However, the probem is still not solved with using the stock light switch. The way that it is configured, it's pretty much all or none. /w3tcompact/icons/crazy.gif That is why I went with this solution.

Terry