Attaching Brush Hog on 3pt what kind of top link do you use ?

   / Attaching Brush Hog on 3pt what kind of top link do you use ? #1  

kingrace78

Bronze Member
Joined
Mar 17, 2013
Messages
60
Location
Prescott, Ks & Lee's Summit, Mo
Tractor
AC D14, LS XR4046H
Always before on my old AC I used a chain for the top link with a brush hog, this allowed the mower to flex on uneven ground. I just bought a new LS tractor and I am wondering what most people do brush hogging on uneven ground. I would think a solid toplink would bend.
Thanks
John
 
   / Attaching Brush Hog on 3pt what kind of top link do you use ? #2  
My brush mower and finish mower, the link that the 3 point top link connects to pivots. This allows both to follow the ground while limiting travel some and allowing a level lift.

I have also used mowers in the past without attaching the top link.

I know others who have used a chain.

The stuff I mow though is a few fields I have mowed for years just to keep the brush down. Don't know how much a deck could jump if hitting unknown objects or small tree's.
 
   / Attaching Brush Hog on 3pt what kind of top link do you use ? #3  
I use a solid top link but the way my land lays there is no problem. If I had rough ground I would use a chain or better yet use a trailer hitch type. I used a trailer hitch type for years and like them best.
 
   / Attaching Brush Hog on 3pt what kind of top link do you use ? #4  
Another solid top link user. My RC also has the pivoting connection point, which works well enough. I'm not mowing a golf course with my RC, so the occasional scalp is no big deal.

Joe
 
   / Attaching Brush Hog on 3pt what kind of top link do you use ? #5  
Mine has a solid top link, BUT the Bush Hog has chain going from the top link down to the mower
 
   / Attaching Brush Hog on 3pt what kind of top link do you use ? #6  
I use a hydraulic top link which works great for me, even better would have been if I had thought to get it with float, live and learn.
 
   / Attaching Brush Hog on 3pt what kind of top link do you use ? #7  
Solid top link (factory jackscrew) but the Rotary Cutter has a pivoting top coupler that allows for quite a bit of upward movement of the cutter.
 
   / Attaching Brush Hog on 3pt what kind of top link do you use ? #8  
My cutter has a float clevis at the top link. This allows deck to follow ground contour for most conditions but limits it to about 45 degree so it can't rotate/flip up beyond safe operating angle.
 
   / Attaching Brush Hog on 3pt what kind of top link do you use ? #9  
I think the best is the swivel joint at the top on the bush hog. These can be retro-fitted to just about any mower and they give enough movement for even the deepest ditches without binding but still gives a solid link back to the tractor.
 
   / Attaching Brush Hog on 3pt what kind of top link do you use ?
  • Thread Starter
#10  
Thanks everyone, I will look for a swivel joint. That sounds like the best option.
 
 

Tractor & Equipment Auctions

2016 Ford E-450 LP Handicapped Bus (A53422)
2016 Ford E-450 LP...
Anderson 31ft T/A Flatbed Equipment Trailer (A51691)
Anderson 31ft T/A...
2003 Walk-Behind Automatic Seed Spreader (A55851)
2003 Walk-Behind...
2014 DIAMOND C TRAILER MFG. (A50322)
2014 DIAMOND C...
1981 AZTEC SKINNY NECK 31 FOOT FLATBED (A53843)
1981 AZTEC SKINNY...
40ft Container (cutout sides with shelving) (A54865)
40ft Container...
 
Top