ASV RC100 ( 2007 ) LIFT ARM PROBLEM !!!!!

[jm74]

LIFT ARMS WORK PROPERLY WHEN HIGH FLOW AUX IS NOT ENGAGED. WHEN I ENGAGE HIGH FLOW TO MY CUTTER, THE LIFT ARMS WILL NOT GO UP OR DOWN ; HOWEVER THE BUCKET TILT WORKS FINE WHILE CUTTER IS ENGAGED .JUST NO UP OR DOWN WITH ARMS... ANY SOLUTIONS ? HELP WOULD BE GREATLY APPRECIATED !

 

[Pcwebb66]

Jm74 I have a 2007 asvrc100 that is having the exact same problem-would like to know if you found out your problem with your machine-and could you pass on the fix-thank you

 

[oldnslo]

Are the directional control valves electrical or mechanical operated. ASV did have some problems with corrosion on electrical connections and issues with bad grounds. If electrical you may want to check for power to the raise lower coils when the hi-flow option is engaged.