are you tired of tractor flat tires
- Thread starter Capt Dan
- Start date
- Views: 5366
LD1
Epic Contributor
Sweet looking, but looks like it would cost more than foam filled tires.
At the top of the site has $15000.00
Jim Timber
Veteran Member
The plastic geared ATV ones are about $3800 a set.
Mendonsy
Veteran Member
Looks like something that Waldon52 would build!
oosik
Epic Contributor
No, Ozley, I saw the 15K price on the selling site. I went to the Mat Trax site and there is no price listing for new ones on that site. You have to send Mat Trax an email and wait for a response to get a price.
Amvcane
Platinum Member
- Joined
- May 24, 2013
- Messages
- 661
- Location
- NEPA
- Tractor
- 2012 Kioti CK35hst tlb; 1988 JD 420; 1990 JD 322; 1987 JD 332; 1985 JD 318; 2010 JD ProGator 2030A;
Awesome looking setup.
One problem I would personally have with this setup,(besides that I don't get enough snow) is the travel speed. Going from an R1 diameter tire to the diameter of the drive cog of the track will greatly reduce travel speed. But increase ground engaging torque. I would imagine you would be operating in high range most of the time. Their website states a 25 - 50% gear reduction depending on original tire size.
All said I would still feel invincible sitting in the operators station.
One problem I would personally have with this setup,(besides that I don't get enough snow) is the travel speed. Going from an R1 diameter tire to the diameter of the drive cog of the track will greatly reduce travel speed. But increase ground engaging torque. I would imagine you would be operating in high range most of the time. Their website states a 25 - 50% gear reduction depending on original tire size.
All said I would still feel invincible sitting in the operators station.
LD1
Epic Contributor
If you got stuck, you would really be stuck:thumbsup:
