OrangeJbird
Silver Member
Has anyone made a tree pruner that fits on their FEL?
Front-End Loader Anyone make a FEL tree pruner?
- Thread starter OrangeJbird
- Start date
- Views: 11715
amigauser
Veteran Member
LIMBHOG Details
Been discussed on TBN before but can not locate the old thread. See vendor link above.
Been discussed on TBN before but can not locate the old thread. See vendor link above.
fcoats
Member
Heres one on orange tractor. He made it and it looks professionally done. When I get some of my current projects completed I plan to do that as well.
Tree limb saw fabrication project - OrangeTractorTalks - Everything Kubota
Good Luck,
Filo
Tree limb saw fabrication project - OrangeTractorTalks - Everything Kubota
Good Luck,
Filo
SandyTX
Bronze Member
From one of my older posts. (not mine; picture I found online). No way I'd try that.
OP
OrangeJbird
Silver Member
Thanks, lots of gre . . . ah . . . er ideas!
Leejohn
Elite Member
Todd727
Gold Member
If you have a log splitter, you can modify it to do the job. Mount the splitter to a QA plate and use the tractor hydraulics to run it. I did it with my skid steer and it works great.
Here is a video of one that you can buy: Skid Steer Tree Trimmer and Wood Splitter - YouTube
I mounted mine to the plate vertically, as described in this ad: Skid Steer Inverted Log Splitter
I still might fab a claw type cutter, but that would just be an exercise in fabrication at this point. Product Navigation
Here is a video of one that you can buy: Skid Steer Tree Trimmer and Wood Splitter - YouTube
I mounted mine to the plate vertically, as described in this ad: Skid Steer Inverted Log Splitter
I still might fab a claw type cutter, but that would just be an exercise in fabrication at this point. Product Navigation