Anyone made their own doors for a Kubota RTV????

[JOHNTHOMAS]

Cheapest doors I can find for my RTV500 is a bit over $300. Has anyone made their own? I believe I can buy two Lexan sheets and hinges for less than that or make lower wood and upper Lexan half for much less than that. ANYONE?????

 

[wawajake]

My RTV xc1100 has doors .....but I did make doors for my tractor out of wood and lexan and believe it ir not ....felt cloth...in black I got from fabric store . It comes in 36 inch rolls and is almost 1/8 th thick . It is light, easy to cut to exact shapes, keeps out snow and rain and easy to attach to wood frames. ( screws and washers) and cheap. I mention it in case you go the DIY route . I was unable to attach pic from my phone but there is probably a pic in my wawajake history on this site. Goodluck either way.

 

[JOHNTHOMAS]

My RTV xc1100 has doors .....but I did make doors for my tractor out of wood and lexan and believe it ir not ....felt cloth...in black I got from fabric store . It comes in 36 inch rolls and is almost 1/8 th thick . It is light, easy to cut to exact shapes, keeps out snow and rain and easy to attach to wood frames. ( screws and washers) and cheap. I mention it in case you go the DIY route . I was unable to attach pic from my phone but there is probably a pic in my wawajake history on this site. Goodluck either way.

Thanks. Went back to 2016 on your posts and found no pic. I'm thinking of luan board and cover it with something or other semi thin wood for lower half of the door ans Lexan for upper half. Guess I want to see out the side when driving. I'll do Lexan or Plexiglas on back window. I made my own front windshield out of two pieces of Lexan and remove he bottom half during summer, now to find what I did with lower half and put it back on.
I had a plexiglass windshield cut and used on the front of my RTV1140 for almost 8 years and it worked well.