Anyone know the correct color grey for Kubota front end weights?

[ovrszd]

There are some Deere rear weights that have the same bolt pattern as Ford. I have done it.

Would have never guessed that!!! Deere usually marches to their own drummer.

 

[sixdogs]

Would have never guessed that!!! Deere usually marches to their own drummer.

They're maybe 1/16" off but they fit. Painted Ford white and no one knew.

 

[sixdogs]

Now that the correct color for Kubota front weights has been determined, here are some Kubota (knock-offs) front end weights I picked up. The weights get painted the same as the frame color of the tractor and that is Dark Gray Semi Gloss. Part number is 70000-73353 for the quart can.

Here's a Kubota paint chart with all the numbers for cans, quarts and gallons

https://www.messicks.com/Kubota-Paint-Chart

And here are pics of the weights. They will go on my L4300.

 

[sixdogs]

Here's the before pic of the above post. I can't get this pic inserted correctly. Night and day difference.

 

[sixdogs]

Here's the final assembled pic, next to the"before" pic and showing the correct color painted weights on and in position. Weights on a tractor give the same satisfying feeling as weight in the back of a pickup. Correct color makes it even better. Heavy implements are a piece of cake to lift with front weights.

It may not seem like much but the correct color is obvious to viewers and a real plus when you sell equipment. Something with overspray from a rattle can or a "close-enough" costs the seller with $$ left on the table.