Anyone install rear wiper or defroster kits themselves on M series cab?

[Hay Dude]

Looking into adding these kits to cab, anyone DIY this job?
Easy or tough?

 

[hazmat]

I did it on a l5460 solo. Not hard. Would have been very easy with a helper.

 

[Jeff F.]

Who is your supplier? I should have gotten it installed on the L4060 and now I will need an after market

 

[E/S]

The wiper is easy, dont know about the defroster.

E/S

 

[hazmat]

Who is your supplier? I should have gotten it installed on the L4060 and now I will need an after market

Local kubota dealer wholegoods

 

[billnj]

I did both. Easy enough job. The rear defroster is actually a new back piece of glass. The hardest part was removing the roof. It's just a lot of bolts to remove.

 

[PILOON]

As said, wiper is easy.
For defrost what I did was to mount a 12 vdc computer fan (3"diam) onto a magnet so that I could position for best results.
The fan blown (slightly warm) cabin air is ample to keep the rear window fog free.

 

[pizzaguy]

Here is what I did. It works great. Similar to what PILOON said.

http://www.tractorbynet.com/forums/kubota-owning-operating/296567-poor-mans-rear-window-defrost.html

 

[Fallon]

I did both. Easy enough job. The rear defroster is actually a new back piece of glass. The hardest part was removing the roof. It's just a lot of bolts to remove.

How did you remove the roof? What bolts were involved? I can't see any I can get to holding the roof on. Need to remove mine to do some wiring.